Overview
As a Company Administrator, you may choose to restrict access to your Qualer platform by allowing access and use only to designated IP Addresses.
(Return to Version Release Full Scope & Risk Assessment)
*This is a "Feature Updates" article. If you need to get actual instructions, please go here
Workflow
To configure this functionality click ADMINISTRATION in the top navigation menu > Click "Operation Settings" on the side menu > Select the "IP Policy" tab:
Limit Site Access to Specified IP Addresses:
Through this functionality, you can limit the access to your platform from a single IP Address, multiple IP Addresses, and/or a range of IP Addresses. You can also, but are not required to, limit access for a certain time range and/or certain days of the week.
To limit access to a single IP address, you will enter the address in the Start IP box, if you want to set this address to a certain date and time you will fill in the Start Time, End Time, and Days fields, then click "Add". To limit access to additional IP addresses, you will repeat the steps above:
To limit access to a range of IP addresses, you will enter the first IP Address in the Start IP field, the last address in the End IP field, then fill in the Time and Days fields (if desired) then click Add.
Once added, to activate the restrictions, be sure to click the check box "Limit site access only to the following IP addresses":
Limit Site Access to Specified API Addresses:
API access to your platform can also be restricted in a similar way as indicated above. However, this function does not allow you to limit access through specific days or times:
Once added, to activate the restrictions, be sure to click the check box "Limit API access only to the following IP addresses":
