Feature ID: 35511
Feature Description: Extended custom fields
Use Case: Extended functionality of custom fields was developed to support new features like having influence quantities in uncertainty budgets and capturing information on certain conditions (e.g. on Fail). New custom fields can also be configured to be displayed above or below the measurements fields as well as to appear or disappear based on certain pass/fail criteria. Custom fields can also be pre-populated (text or drop down) when certain service options are selected. As well, these custom fields can be required to answer
An example of this feature could be if you want a vendor/technician to provide some context as to why a device failed a measurement test.
Additionally, you could elect to have a custom field above the measurement to set up devices or variables that aren’t necessarily being measured directly. Such as measure AC voltage, which measures voltage and frequency. You may include a custom field above if proper equipment needs to be set up in anticipation of running these test.
Click Administration
Click Service Capabilities
Select the desired Instrument Category
Select the desired Service Category
Click Measurements
Click the desired Measurement
Click Custom Fields
Click Add New Field
To adjust, click Position and select the desired position
To define values set in Valid Values, to require Click Require Star
The custom field will then be visible in the assigned position in all affiliated work orders containing that service level/measurement.
All information about:
- Custom Fields and Service Levels you can find here